Name:Ms. Hao (General Manager)
Add:No. 1998, Kangbo Avenue, Songguandi Sub-district Office, Economic and Technological Development Zone, Dezhou City, Shandong Province






Copyright © 2019  Dezhou Bodystorm Fitness Equipment Co., Ltd. 鲁ICP备19041978号-1 Powered

24-Hour Hotline :86-534-2180818




Little knowledge about fitness Low price spinning bike

Industry News
Release time:
Page view

Fitness Low price spinning bike, including a frame that can be stably supported on the ground, a handle set at the front of the frame, a seat cushion set at the middle of the frame, a flywheel set at the rear of the frame, including a magnetic powder brake, A crankset arranged in the middle of the frame and a pedal connected to the crankset, the crankset and the rotating shaft of the flywheel are connected by belt or chain drive, and the magnetic powder brake includes a stator and an excitation coil mounted on the stator , Rotate the rotor and the central shaft installed in the stator, the central shaft is inserted into the stator and connected with the rotor, the central shaft and the rotating shaft of the flywheel are connected by belt or chain transmission, and the stator and the rotor are arranged With magnetic powder, the exciting coil can generate a magnetic field in an electrified state to make the magnetic powder form a magnetic powder chain to increase the torque of the rotor. The strength of the magnetic powder chain is proportional to the magnitude of the magnetic field, and the torque of the rotor can be linearly adjusted by controlling the magnitude of the current, so as to achieve high-precision control of the motion resistance.

The above is a brief introduction to the relevant knowledge about fitness Low price spinning bike.

Related News

customized dumbell products
Rotary customized dumbell products include a handle portion, a base portion, a counterweight portion located at both ends of the handle portion, and a transmission self-locking mechanism and a self-locking mechanism that are respectively provided with both ends of the handle portion and abut against the counterweight portion. moving mechanism.
Details used by Wholesale bench press
Lie on a flat Wholesale bench press, with your feet on the ground, slightly wider than your shoulders, your knees at a 90-degree angle, and your lower back slightly bent to maintain the natural curvature of your spine. Pinch your hips and keep your shoulders and hips close together Wholesale bench press board, holding the barbell slightly wider than shoulders apart.
Wholesale bench press
2022-05-10 08:30
The Wholesale bench press training device includes two base plates, a rod sleeve and a support rod are symmetrically arranged between the two base plates, and a slider is provided on the side of the rod sleeve and a support rod close to the base plate, and the base plate is provided with a sliding block. corresponding chute.
customized bench press trainer for parks
The customized bench press trainer for parks includes a bed frame composed of steel pipes, and four metal support rods of equal length are arranged on both sides of the bed frame, which are arranged in a rectangular shape and are fixed to the ground.
Grip of customized bench press
The distance between the hands is less than the shoulder width is called narrow grip; the distance between the hands is the same as the shoulder width or slightly wider is called the middle grip; the distance between the hands is wider than the shoulder and two palms are called wide grip.