Product features of the glute machine


Release time:

2022-10-27

1. The glute machine Adopts 50*80mm rectangular pipe and Q195 steel pipe with a wall thickness of 2.5mm as the main frame; Rotation fulcrum of the glute machine is pressed by bearing steel with wear-resistant and uniform hardness, which makes the product run lightly.

Product features of the glute machine

1. The glute machine Adopts 50*80mm rectangular pipe and Q195 steel pipe with a wall thickness of 2.5mm as the main frame;  Rotation fulcrum of the glute machine is pressed by bearing steel with wear-resistant and uniform hardness, which makes the product run lightly.

glute machine for sale near me
2. Cushion of the glute machine. The cushion and backrest foam are made of high-density recycled foam, with a thickness of 30MM and a density of 170KG/m; the board is made of high-density board, with a thickness of 18MM and a density of 650KG/m3; plus high-quality PVC material leather processing, cushion adjustment Convenient and fast, high safety.
3. Counterweight of glute machine uses flat steel counterweight pieces, each weighing 5kg;  Spraying: Special powder electrostatic spraying treatment for fitness equipment, which is firmly combined with the base material and has strong anti-corrosion ability. Steel wire rope: 7" x19" high-strength steel wire rope for aviation, with a diameter of 5.6MM, covered with PVC material, and has undergone 100,000 tensile tests.
Through the above introduction and analysis of the Product features of the glute machine, hope it helps you.

Key words: